ECO-AQUA LED
Our Eco-Aqua lamps blend multiple coloured LED’s, bringing out the vivid iridescent colours of fish and giving a dramatic three-dimensional look to the aquarium. Our lamp provides natural colour rendering.
- Sized to replace T8 fluorescent lamps
- Lamps are sized to fit between existing T8 lamp holders - Low energy consumption – almost half that of an equivalent sized T8 lamp
- Long life span (average of 50,000 hours normal use)
- 2 Year Guarantee
- Waterproof IP67 lamp
- Low voltage lamp design with 2m lamp lead
- Remote mains voltage driver and switch
- Contains no mercury
- Compatible with Eco-Aqua mounting clips** and frame*
- Shopfit versions also available
Safety, Installation And Maintenance Instructions
Aqua 2010 Exhibition
Display for Aqua 2010 Trade Show, demonstrating the lighting effect from our Eco Aqua LED strips. The stunning aquascaping from James Findley, The Green Machine.
 |
 |
 |
 |
 |
 |
Models Available
Eco-Aqua Daylight
Spectacular natural colour rendition with a high (>8K) colour temperature equally suited for Freshwater or Marine aquariums.
| Code | Watt | Length | Diameter | T8 Equivalent |
|---|---|---|---|---|
| ETD390 | 9W | 384mm | T8 – 26mm | 15W |
| ETD540 | 14W | 537mm | T8 – 26mm | 18W |
| ETD690 | 17W | 687mm | T8 – 26mm | 25W |
| ETD850 | 19W | 842mm | T8 – 26mm | 30W |
| ETD1000 | 23W | 997mm | T8 – 26mm | 38W |
| ETD1150 | 32W | 1147mm | T8 – 26mm | 36W |
Eco-Aqua Tropical
Warm colour that enhances the red colours of fish and plants without flattening the iridescent blues of many tropical fish.
| Code | Watt | Length | Diameter | T8 Equivalent |
|---|---|---|---|---|
| ETT390 | 9W | 384mm | T8 – 26mm | 15W |
| ETT540 | 14W | 537mm | T8 – 26mm | 18W |
| ETT690 | 17W | 687mm | T8 – 26mm | 25W |
| ETT850 | 19W | 842mm | T8 – 26mm | 30W |
| ETT1000 | 23W | 997mm | T8 – 26mm | 38W |
| ETT1150 | 32W | 1147mm | T8 – 26mm | 36W |
Eco-Aqua Marine Blue
Combining deep blue, light blue and violet LEDs results in a spectacular actinic moonlight colour, ideal for marine or freshwater aquariums. Can be mixed with Daylight lamps for marine systems
| Code | Watt | Length | Diameter | T8 Equivalent |
|---|---|---|---|---|
| ETML390 | 9W | 384mm | T8 – 26mm | 15W |
| ETML540 | 14W | 537mm | T8 – 26mm | 18W |
| ETML690 | 17W | 687mm | T8 – 26mm | 25W |
| ETML850 | 19W | 842mm | T8 – 26mm | 30W |
| ETML1000 | 23W | 997mm | T8 – 26mm | 38W |
| ETML1150 | 32W | 1147mm | T8 – 26mm | 36W |
Accessories
T8 lamp holder adapter clips
These adapters clip on to each end of an Eco-Aqua lamp, allowing it to fit into existing T8 aquarium light fittings.
With the clips fitted, the Eco-Aqua lamps are the same length as equivalent T8 fluorescent lamps. For example a 9W Eco-Aqua lamp, which is equivalent to a 15W T8 aquarium lamp, is the same length as a 15W T8 lamp when the clips are fitted.
Adapter clips are compatible with the majority of aquariums supplied with a central T8 light unit with waterproof lamp holders (e.g. Juwel Multilux T8 light units). For specific aquarium compatibility, please check with your supplier or visit the Arcadia website for the latest list of compatible aquariums.
Note: This is a mounting system only. Power for the Eco-Aqua lamp comes from the driver.
| Code | |
| ABE8PC | Adaptor clips |
Aquarium mounting frame
The aquarium mounting frame consists of a pair of telescopic struts which mount inside the hood of a conventional rectangular, frame-top aquarium. The mounting legs support the installation of multiple Eco-Aqua lamps and the position of the lamps is fully adjustable.
Three versions are available to suit different aquarium depths; The small frame fits aquariums from 300mm to 426mm wide and holds up to four Eco-Aqua Lamps, the large frame fits aquariums from 570mm to 714mm wide and holds up to six Eco-Aqua Lamps
| Code | Aquarium depth |
| ESP001 | 300-426mm |
| ESP002 | 426-570mm |
| ESP003 | 570-714mm |
