Need Help?

Register now to gain access to the Arcadia Products Community Portal. Its designed to provide assistance to our Customers, Users and Contributors who want to integrate and get the best possible results from the Arcadia products.

The Benefits of Membership

Gain access to:
- Arcadia Knowledgebase.
- Troubleshooting Assistant.
- Product Documentation.
- Arcadia Products Forum.
- Live-chat and Technical Support.

Not Yet Registered?

Signing up is easy and takes less and 3 minutes. Take a moment to create a user account and get verified instantly. Register now to join the Arcadia Products Community to gain access into valuable tips and updates and the newest product releases.

Sign up instantly!

A revolutionary new high performance T5 reptile lamp from Arcadia.

Related Products

Marine Bio Pearls
A specially formulated bio-active media designed to promote the growth of Nitrate and Phosphate reducing bacteria and associated Enzymes.

Marine Bio Pearls
A specially formulated bio-active media designed to promote the growth of Nitrate and Phosphate reducing bacteria and associated Enzymes.

Marine Bio Pearls
A specially formulated bio-active media designed to promote the growth of Nitrate and Phosphate reducing bacteria and associated Enzymes.

Lighting Guide

How to fit your UV system correctly.

The Gyractor G400/1000 Bio Reactor

The Gyractor G400/1000 Bio Reactor has a unique fluidising plate designed to help keep the Media in suspension and evenly disperse the water upwards for greater removal of bacteria. This is all achieved by using a very low powered SICCE SILENT syncronous pump which is included. The reactor includes a specially designed plate at the top to keep the Media within the reactor without the need for sponges.

G 400
1. MARINE BIO PEARLS 250ml

A specially formulated bio-active media designed to promote the growth of Nitrate and Phosphate reducing bacteria and associated Enzymes. Easier to use, lower maintenance and more economical than Carbon or Phosphate removal media.

2. SYNCRA 0.5 SILENT (8watts)

• Flow regulator
• Easy maintenance
• High wear resistance rotor
• Superior quality: Power and quietness
• Pre-filter, hose adaptors and suckers included

3. UNIQUE FLUIDISING BASE

Dual action reactor. Provides strong agitation of the Pearls at the bottom which allows the bacteria to be cleaned off and slow tumbling action at the top to allow the growth of biofilm.

4. 0.5 METRE POLY PIPE


G 1000
1. MARINE BIO PEARLS 500ml

A specially formulated bio-active media designed to promote the growth of Nitrate and Phosphate reducing bacteria and associated Enzymes. Easier to use, lower maintenance and more economical than Carbon or Phosphate removal media.

2. SYNCRA 1.5 SILENT (23watt)

• Flow regulator
• Easy maintenance
• High wear resistance rotor
• Superior quality: Power and quietness
• Pre-filter, hose adaptors and suckers included

3. UNIQUE FLUIDISING BASE

Dual action reactor. Provides strong agitation of the Pearls at the bottom which allows the bacteria to be cleaned off and slow tumbling action at the top to allow the growth of biofilm.

4. 1 METRE POLY PIPE

 

Code Watt Length Diameter Lumens Temp UV-A UV-B Reflector*
FD324T5 24W 22″/550mm T5-16mm 1050lm 7000K 30% 6% ALRS24
FD339T5 39W 34″/850mm T5-16mm 2000lm 7000K 30% 6% ALRS39
FD354T5 54W 46″/1150mm T5-16mm 3000lm 7000K 30% 6% ALRS54

Product Safety

Lamps can be fragile pieces of equipment. Please follow the following steps to ensure the safe fitting and use of fluorescent lamps.

At either end of a fluorescent lamp you will see two brass coloured connection pins. These are the electrodes that take energy from the controller to start and run the lamp. These are quite fragile by nature. It is imperative that both pins are safely located into the pin sockets inside the lamp holder before the lamp is pressed into place. Failure to line the pins up correctly will cause the pins to bend and snap and break through the lamp cap rendering the lamp unusable.
The Ultra-seal lamp ring must be unscrewed from the lamp holder and placed over the lamp prior to fitting and only re-seated onto the lamp holder when you are sure that the lamp pins are seated correctly. High Output T5 lamp leads must be fully unwound also or you may notice lamp flickering or beaks in illumination. You can also use a very small amount of a substance like Vaseline to lubricate the lamp ring and so stop it fusing to the lamp after long periods of heat. After cooling lamps can be wiped clean with a damp cloth once every two weeks or so to remove any dust build up from the lamp, this in turn will help to maintain the lamps full output. The all important reflector should also be wiped clean at the same time.

Related products

FLUORESCENT LAMP REFLECTORS

Double your light output!

Further details…


T5 ELECTRONIC CONTROLLER

Powering your T5 lamps!

Select the correct controller to add lighting to your vivarium.

Further details…


T5 VIVARIUM CANOPY

A high performance luminaire designed to fit the most popular ranges of glass terrariums.

Further details…